How to Make a Juul Charger: A Step-by-Step Guide

If you’re an avid Juul user, you know how important it is to keep your device charged at all times. But what happens when you forget your charger at home or it stops working? Don’t worry, with a few simple steps and some basic materials, you can make your own Juul charger in no time. In this article, we’ll show you how to make a Juul charger that works just as well as the original.

Materials Needed:

  • USB cable
  • Scissors
  • Electrical tape
  • Juul device
  • A flat surface to work on

Cut the USB Cable

The first step in making a Juul charger is to cut the USB cable. Use the scissors to cut the end of the USB cable that connects to your computer or wall adapter. Be sure to leave enough cable so that you can work with it.

Strip the Wires

Once you’ve cut the USB cable, you need to strip the wires inside. Cut the outer insulation of the USB cable with your scissors to expose the wires. You should see four wires: red, black, white, and green. Cut the white and green wires as they are not needed for this project.

Connect the Wires

Now it’s time to connect the wires. Connect the red wire to the positive terminal of the Juul battery and the black wire to the negative terminal. Use the electrical tape to secure the wires in place.

Test the Charger

After you’ve connected the wires to the Juul battery, plug the USB cable into a computer or wall adapter. The Juul device should begin charging. If it doesn’t, check the connections and try again.

Secure the Charger

Once you’ve tested the charger and everything is working correctly, use the electrical tape to secure the wires to the Juul device. This will prevent the wires from coming loose and damaging the device.

Use Your Charger

Now that you’ve made your own Juul charger, you can use it just like you would any other charger. Be sure to keep it in a safe place and avoid bending or twisting the wires.


Is it safe to make my own Juul charger?

As long as you follow the steps correctly and use the right materials, making your own Juul charger is safe.

Can I use any USB cable to make a Juul charger?

Yes, any USB cable will work as long as you strip the wires correctly and connect them to the Juul battery.

How long will it take to charge my Juul device using this homemade charger?

The charging time will depend on the power output of the computer or wall adapter you’re using. However, it should take around 45 minutes to an hour to fully charge a Juul device.


making your own Juul charger is a simple and easy process that anyone can do with just a few basic materials. By following the steps outlined in this article, you can create a charger that works just as well as the original. Remember to be careful when working with electrical components and always test the charger before using it regularly. With your new homemade Juul charger, you can ensure that your device is always charged and ready to go.

Leave a Comment